Viprominent HT80 Executive - www.viprotech.com

 

 

HomePartnersViprotechDownloads
 

Screen printing
Drying
Pre/Post press

Pad printing

Other brands
Used machines
Contact us

 

Viprominent HT80 Executive

 

Viprominent HT 80 Executive

Technical details / brochure

The renewed Viprominent HT80 Executive is once again the summit of large size manual printing tables. The machine is provided with a motor driven, horizontal lift of the print head. The lifting arms on the sides are placed far back for optimum loading and unloading of materials.

The Viprominent HT80 Executive distinguishes itself by a stable, fixed squeegee bar that runs through a rail system at the front and rear of the upper frame. The up and down movement of the squeegee and the squeegee turn-over before and after the printing stroke is done pneumatically by pushbutton operation. With an easy movement of the hand the squeegee bar can be moved along the rails for printing while the squeegee pressure remains fixed.

The Viprominent HT80 Executive is suited for all screen sizes and all necessary printing adjustments can be made manually without use of special tools.
The construction of the Jumbo is heavier than the smaller Executive types.

Standard design of both Viprominent HT80 Executive and Executive Jumbo includes:

  • Printing table of anodised aluminium and equipped with an absolutely play free fine-register adjustment in X-Y- and diagonal direction

  • Electric adjustment of the off-contact by pushbutton control.
    Adjustment range 3 - 28 mm

  • Because the adjustment is made in the printing table, the register is kept even when adjustment takes place in a printing run

  • The screen can easily be slid in from the front of the printing table. Motorised movement of the horizontal print head. Down movement with approved two button security operation in the front of the table. Up movement by pressing a button in the handle of the one arm squeegee after the printing stroke

  • Stable, fixed squeegee bar that runs through a rail system at the front and rear of the upper frame (manual pressure on the squeegee is no longer necessary)

  • The up and down movement of the squeegee and the squeegee turn-over before and after printing is pneumatically

  • The squeegee pressure can be set independently and mechanically and can be read at the front and the rear

  • Screen clamping bars, movable from both sides and provided with a quick locking system for the screens, enable the use of all screen sizes

  • Very silent vacuum, synchronised with the printing cycle (the number of vacuum motors depends on the printing size)

Options

  • Extra vacuum motor for a very strong vacuum (installation and vacuum valve included)

  • Automatic lift-off system (maximum printing size will be reduced in length with approx. 10 mm)

  • Stainless steel printing table

  • Pneumatic operated roller balls


©1998-2008 Viprotech Group www.viprotech.com
Disclaimer