Vipromat Integral

The Vipromat Integral, based on the Vipromat Executive, is equipped with an integrated take-off system and a conveyor belt.

The take-off system contains four suction units that can slide in sideways to fit the material size. Each suction unit has a 21 mm silicone suction cup that individually can be switched on or off. All the adjustments to the take-off system can be made quickly without any tool. The waiting position of the take-off just under the rear part of the top frame contributes to fast cycle times. Functions like the variable take-off speed and vacuum delay allow even difficult to handle material to be processed without any trouble.

The speed of the continuously running conveyor belt can be adjusted between 5 and 25 m/min and transports the printed material to a connecting dryer. The conveyor belt is placed right behind the printing table, making this machine as compact as possible.

The Vipromat Integral owes it's success mainly to it's compactness, flexibility and ease of use and the fact that the well known and proven Vipromat Executive is the basis on which the Integral is designed.

The characteristics and specifications of the Vipromat Executive including the options (except for the machine dimensions) apply to the Vipromat Integral as well.

Specifications:

The printing parameters on the printing unit can be set fully electronically on the control panel, allowing these parameters to be recorded for repeat jobs. A digital display shows all set values and production parameters

Printing table of anodised aluminium and equipped with an absolutely play free fine-register adjustment in X-Y and diagonal direction

Electric adjustment of the off-contact with digital read-out. Off-contact adjustment range 3 - 28 mm

Automatic lift-off

The squeegee is printing from front to rear, offering excellent control over the screen during the print stroke

Pneumatic screen locking system. Screens can be slided in from the side and may extend the machine on either side. Especially useful when printing successive jobs with a single screen

Independent variable squeegee and floodcoater speed, adjustable between 0,2 - 1,2 m/sec. Digital read-out

Adjustable print stroke by sliding proximity switches

High precision linear bearing system for vibration-free squeegee guiding

Pneumatic squeegee / floodcoater change-over system and an independent pneumatic squeegee pressure system with two pressure cylinders. Accurate pressure setting with manometer reading and on-off function from the control panel

Print-flood or flood-print action

Adjustable dwell at the end of the squeegee stroke to ensure perfect peel under all conditions

Fully programmable vacuum function:
- A permanent vacuum for set-up purposes
- Pre-vacuum with adjustable dwell for easy handling warped materials
- Blow-back for easy take-off of heavy or light static materials

Electronic printed sheet counter

Full security around the printing machine through a red safety bar and emergency buttons that stop the machine in case of obstruction. Intrinsic safe lifting mechanism

The take-off unit, adjustable in depth (A4 portrait), has 4 suction units with ø21mm suction cups, independently adjustable in width

These suction units, which are developed by Viprotech, come down vertically as soon as the stop position is reached. This way also materials that are difficult to process can be handled

High quality conveyor belt. The belt speed is adjustable from 5 to 25 m/min

Options

Stainless steel table

Pneumatic operated lay-stops

Dripless squeegee system (maximum printing size will be slightly reduced)

Modified take-off bridge to enable A4 landscape to be processed