-
Completely controlled by
computer by means of advanced PLC combined with user-friendly touch
screen
-
Horizontal lifting of the
upper frame
-
Active take-off system of
which, during the outward movement of the printing table, the grippers
deliver the material directly on the inlet belt of the dryer
-
Micro-registration
adjustment of the screen
-
Adjustable pneumatic
squeegee pressure by means of self correcting pressure setting
-
Pneumatic squeegee
turn-over
-
Pneumatic screen locking
system
-
Independently adjustable
speed of squeegee and floodcoater 0.1 - 1.0 m/sec
-
The position of the
squeegee carriage is determined by means of encoders, without the use of
limit switches. With this technique the squeegee stroke is set by moving
the squeegee carriage to the beginning and the end of the printing image
-
Sample function to get
printed material returned for a check by the printer
-
Ink-return function to
collect the ink, which has massed outside the squeegee stroke, and bring
it within the printing area. This prevents the drying and the excessive
use of ink
-
Fully programmable vacuum
functions: pre-vacuum, vacuum, permanent vacuum and blow back by means
of a silent but powerful vacuum motor
-
Choice of squeegee-stop:
‘print - flood’ to increase the production speed and to avoid drying
of the ink in the screen; or ‘flood - print’ to avoid leaking of the
ink when printing for example a negative printing image
-
Choice of printing 1 to 10
times on the same material
-
Adjustable dwell-time at
the end of the squeegee stroke to ensure good peel-off when using inks
with high viscosity and in case of a too low tension of the mesh
-
Lift-off can be switched on
or off (automatic screen lift quasi-synchronic with squeegee stroke)
-
Extensive counter function
which warns the printer when reaching the total printed amount
-
Extra high lift of the
upper frame so the printer has easy access and freedom of movement to
carry out control or cleaning proceedings without any trouble
-
The digitally adjustable
off-contact height is readable from the touch screen
-
Operation manually as well
as automatically with adjustable feeding time
-
Possibility to use the
machine semiautomatic by switching off the gripper system. This way
enables printing on material which is thicker than the thickness
mentioned in the take-off specifications
-
The printing table and the
hereto connected gripper system are adjustable in speed
-
Possibility to open the
grippers before the end of the gripper movement. Very useful when
printing heavier materials
-
The desired lay stops can
be activated easily, just by touching the touch screen. Besides the
front lay stops one can choose for left- or right-hand side lay stops
-
Self-adjustable grippers
for the handling of material with a maximum thickness of 4 mm
-
Optical take-off security
blocks the gripper return movement in case of material being taken out
wrongly
-
The screen slides in and
out from the left or right side and may extend during printing: an
advantage when combining several printing images in one screen
-
Before each print stroke
all machine functions will be checked rapidly. A possible disturbance
will be reported and in many cases the control will take the appropriate
action
-
The solid way of
construction, application of maintenance-free tooth belts for printing
table and squeegee movement plus linear bearing system of squeegee
carriage and gripper system, contribute to a reduction of the sound
level
-
Constructed by using
high-quality components of leading suppliers, which are available
world-wide
-
Squeegee bar type B (4cm)
Technical
details / brochure